Volume 3, Issue 4, August 2018, Page: 54-60
Instrumental Texture Profile Analysis (TPA) of Cucumber Fruit as Influenced by Its Part and Maturity Stage
Oderhowho Nyorere, Agricultural and Bio-Environmental Engineering Technology Department, School of Engineering, Delta State Polytechnic, Ozoro, Nigeria
Hilary Uguru, Agricultural and Bio-Environmental Engineering Technology Department, School of Engineering, Delta State Polytechnic, Ozoro, Nigeria
Received: Sep. 15, 2018;       Accepted: Sep. 27, 2018;       Published: Oct. 24, 2018
DOI: 10.11648/j.ajetm.20180304.11      View  190      Downloads  11
Abstract
Instrumental texture profile analysis (TPA) of Nandini cucumber fruit, was measured as a function of its parts (stalk, mid and blossom), and maturity stages. These textural parameters; hardness, springiness, adhesiveness, gumminess, stringiness, fracturability, and chewiness of the fruit were measured; over a course of four maturity stages, 6, 9, 12 and 15 Days after Peak Anthesis (DAPA). The texture profile analysis was done by using the Warner-Bratzler shear force (WBS) method, and the results showed that maturity stage and fruit part significantly (P ≤ 0.05) influenced all the textural parameters evaluated. Over the course of maturation, all the parameters investigated were found to increase. During maturation, the stalk, mid and blossom hardness increased by 25, 26 and 32% respectively; springiness increased by 6.4, 7.7 and 6.2 % in the stalk, mid and blossom; gumminess increased by 57.7, 57.4 and 42.2% in the stalk, mid and blossom; chewiness increased by 60.5, 63.1 and 47% in the stalk, mid and blossom; fracturability increased from 89.13 to 118.29, 82.76 to 110.7 and 62.28 to 90.12 N in the stalk, mid and blossom; adhesiveness increased from 9.14 to 13.2, 8.49 to 12.27 and 7.15 to 9.83 Ns in the stalk, mid and blossom; lastly, stringiness increased from 20.05 to 21.61, 19.46 to 20.81 and 19.06 to 19.79 mm in the stalk, mid and blossom. The results showed significant correlation of all the parameters investigated with maturation and fruit part.
Keywords
Texture Profile Analysis, Cucumber Fruit, Maturity Stage
To cite this article
Oderhowho Nyorere, Hilary Uguru, Instrumental Texture Profile Analysis (TPA) of Cucumber Fruit as Influenced by Its Part and Maturity Stage, American Journal of Engineering and Technology Management. Vol. 3, No. 4, 2018, pp. 54-60. doi: 10.11648/j.ajetm.20180304.11
Copyright
Copyright © 2018 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Ullah, M. Z., Hassan, M. J., Chowdhury, A. Z. M. K. A, Saki, A. I. and Rahman, A. H. M. A. (2012). Genetic variability and correlation in exotic cucumber (Cucumis sativus L.) varieties. Bangladesh Journal of Plant Breeding and Genetics 25(1):17-23.
[2]
Eboibi, O. and Uguru, H. (2017). Storage conditions effect on physical, mechanical and textural properties of intact cucumber (cv Nandini). International Journal of Engineering and Technical Research. Volume-7, Pp 48-56
[3]
Eboibi, O. and Uguru, H. (2018). Effect of Moisture Content on the Mechanical Properties of Cucumber Fruit. International Journal of Scientific & Engineering Research Volume 9, pp 671–678.
[4]
Nema, N. K., Maity, N., Sarkar, B. and Mukherjee, P. K. (2011). Cucumis sativus fruit potential antioxidant, anti-hyaluronidase, and anti-elastase agent. Archives of Dermatological Research 303:247-52.
[5]
Soni, R. (2017). “8 Amazing Health Benefits of Cucumber Seeds.” Downloaded from https://www.homesogood.com/8-amazing-health-benefits-of-cucumber-seeds/ downloaded on 24th August, 2017
[6]
Bourne M. C. (1980). Texture evaluation of horticultural crops. Hort. Sci., 15, 51-56.
[7]
Szczesniak, A. S. (1963). Classification of Textural Characteristics. Journal of Food Science 28.4
[8]
Chen, L. and Opara, U. L. (2013). Texture measurement approaches in fresh and processed foods — A review. Food Research International Vol 51 (2): pp 823-835.
[9]
Klima, J. L., Malladi, A., Scott, N. D. (2011). Differences in cell number facilitate fruit size variation in Rabbit eye blueberry genotypes. Journal of the American Society for Horticultural Science 136, 10–15.
[10]
Costa, F., Cappellin, L., Longhi, S., Guerra, W., Magnano, P., Porro, D., Soukoulis, C., Salvi, S., Velasco, R., Biasioli, F., Gasperi, F. (2011). Assessment of apple (Malus × domestica Borkh.) fruit texture by a combined acoustic-mechanical profiling strategy. Postharvest Biology and Technology 6, 21–28.
[11]
Giongo, L., Poncetta, P., Loretti, P., Costa, F., 2013. Texture profiling of blueberries (Vaccinium spp.) during fruit development, ripening and storage. Postharvest Biology and Technology 76 (2013) 34–39.
[12]
Alamar, M. C., Vanstreels, E., Oey, M. L., Moltó, E. and Nicolaï, B. M. (2008) Micromechanical behaviour of apple tissue in tensile and compression tests: Storage conditions and cultivar effect. Journal of Food Engineering. 86 (3), 324–333.
[13]
Szczesniak A. S., 1998. Effect of storage on texture. In: Food Storage stability (Eds I. A. Taub, R. P. Singh). CRC Press, Boca Raton, FL, USA.
[14]
Myhara R. M., Al-Alawi A., Karkalas J. and Taylor M. S. (2000) Sensory and textural changes in maturating Omani dates. Journal of the Science of Food and Agriculture, 80, pp. 2181–2185.
[15]
Guiné, R. P. F., Andrade, S. Correia, A. C., Jordão, A. M., Lopes, A. D. and Ferreira, D. (2011). Evaluation of textural properties in apples of regional varieties. International Journal of Food Properties. 14, (2): 331-338.
[16]
Paoletti, F., Moneta, E., Bertone, A. and Sinesio, F. (1993). Mechanical Properties and sensory evaluation of selected apple cultivars. Lebensmittel-Wissenschaft und-Technologie (LWT), 26 (3), 264–270.
[17]
Mavroudis, N. E., Dejmek, P. and Sjoholm, I. (2004). Studies on some raw material characteristics in different Swedish apple varieties. Journal of Food Engineering. 121–129.
[18]
Steffe, J. F. (1996). Rheological Methods in Food Process Engineering. (Second Edition). Freeman Press, USA. Pp 72-90.
[19]
Karaj, S. and Muller, J. (2010). Determination of physical, mechanical and chemical properties of seeds and kernels of Jatropha curcas L. Ind. Crop Prod. 32, 129–138.
[20]
Brennan, J. G., Jowitt, R. and Mohamed, A. M. A. (1977). Instrumental measurement of fruit texture: a study on apples. Ann. Appl. Biol. 87:121-127.
[21]
Abdullah, M. A., Hussain M. S., Diaeldein, O. A. and Mahmoud, A. Y. (2014). Texture profile analysis of date flesh for some Saudi date cultivars. International Journal of General Engineering and Technology. Vol. 3 (3): 1-10.
[22]
Nadeem, M., Salim-Rehman, Anjum, F. M., Bhatti, I. A. (2011). Quality evaluation of some Pakistani date varieties, Pakistan. J. Agric. Sci. 48, 305–313.
Browse journals by subject